By April Hann Lanford
Handling Fine Art
By April Hann Lanford
Improper handling poses one of the greatest risks to the damage of an item.
Whenever handling a work of art, it is important to identify if there are areas of damage or weakness. Keeping an eye for areas of instability and understanding the construction of a piece can all play an important role on how the work is handled, packed, and/or transported.
Pay close attention to frame ornamentation on ornate frames, since they protrude from the frame profile, they are often vulnerable to damage and tend to be in unstable condition. On ornamental frames, while it sounds straight forward, ornamentation that extends from the lower edge of the bottom rail is often damaged from handling by simply sitting the frame on the floor, and the ornament is immediately impacted from direct contact with the floor. When handling ornamental frames, avoid putting stress on any of the ornamentation. Handle the frames on the bottom and the sizes. The lower rail should always be supported. Rather than placing the piece in direct contact with the floor, framed works should be placed on top of foam blocks.
Care for the Corners
Corners on frames are also vulnerable to damage. Corners can be dented, and the miters be compromised by impact. Review for open joins, or related cracks in the corners. When handling, the lower rail should always be supported.
Gold Leaf and Painted Finishes
Review gilded and painted finishes for areas of loss, flaking, cracks, etc. Often areas of loss denote that the adjacent areas are also weak and could be further compromised. Avoid touching these weak areas. If detached elements are found, place them in a labeled envelope or bag, and keep it with the piece. Never put tape on the surface of a gilded or painted frame. Even a small piece of scotch tape can cause irreversible damage to a stable gilded surface.
Check the Back
Review the hanging hardware on the back of a frame. Check to make sure it is secure.
Never handle a frame by its wire or other hanging hardware. The stress from handling can cause the wire to break, or the hardware to pull out of the frame. Confirm how the framing materials are secured within the frame. Are they securely installed, or are the materials loosely put in with a few nails, thus endangered to fall out? If you are handling a compromised frame, always make sure that the components are stably secured inside. Whether by adding additional hardware, or through careful handling.
Works on Paper
Review the glazing on the piece. Is it framed with glass that is prone to breaking, or framed with acrylic that is shatter resistant? What is the surface on the glazing? Is that surface sensitive to handling/contact?
Glass film can be used on most glass to deter breakage. It is best to avoid shipping items glazed with glass and use acrylic instead. When packing items glazed with anti-reflective glazings, it is best to not apply anything to the surface as it could irreversibly mar the sputtered coating.
Review the orientation of the piece, and how it is mounted within the frame. Is the piece stable in the frame. When handling a work on paper, if it is securely mounted, it is best to handle it in its proper orientation. If you pack and handle a framed work on paper upside down, it could cause stress on the hinges and cause further damage.
Check to see if an item is loose or has slipped from its mount. If it is loose, it will likely appear crooked, have fallen to the lower edge of the frame, or the image is misaligned within the mat window. Loose items should be carefully secured, unframed, or transported flat.
If the photograph, or work on paper is warped, review the piece closely to determine if any of the media is in contact with the glazing. Mishandling can cause the adhered media to detach from the rest of the sheet. Never try to detach the work yourself, this type of condition is usually best resolved by a conservator to achieve the best possible outcome.
Always check for deformations, bulges, losses, cracks and instability in the paint layer. Avoid touching the surface of the paint layer.
When handling, always handle by the sides and the lower edge of the stretcher. Never simply hold from the upper rail or wrap fingers around the interior of the stretcher so that they touch the interior of the canvas. Rather than placing a canvas in direct contact with the floor, unframed canvases should be placed on top of foam blocks.
Rather than placing a canvas in direct contact with the floor, unframed canvases should be placed on top of foam blocks.
Check the back of a painting for a rigid backing board. Often, part of the standard of care is to install a backing board to protect the back of a canvas after it has been treated. If the canvas does not have a backing board, avoid contact with the back of the canvas.
Never lean anything against the back (or front) of a canvas.
These are a few key best practices to keep in mind when handling fine art. If you have had an item or collection that has been compromised from fire, moisture, impact or elevated levels of humidity, a specialist should be contacted immediately as it adds further complexity to how the artwork should be handled.
If you have any questions about handling or care of your collection, please contact us at:
Our collection of educational articles about
custom framing, collection care, and emergency response are updated regularly.
Click on each topic below for a menu of corresponding articles.
Subscribe to our Newsletter
collection care tips and project stories
directly to your inbox
We are available to assist you
Contact us today for an appointment
840 N. Milwaukee Ave, Chicago IL 60642
Mon-Fri: 9am - 5:30pm
Complimentary parking is available in the loading zone in front of the building
Copyright 2021, Artifact Services, LLC | An ArtMill Group Company